3 Steps To Troubleshoot a Commercial Irrigation System
There are a number of ways in which a commercial irrigation system may malfunction. One of the most common indications of irrigation problems is a leak. Leaks may be noticeable above ground or occur underground. Here are three steps to ensure that irrigation equipment operates as intended.
1. Check Equipment Condition
Some of the most common irrigation equipment malfunctions involve sprinkler heads, valve boxes, or the main and lateral lines. Many issues can be resolved with an inspection that identifies any components that are blocked, broken, leaking, or misaligned. Contact the company that installed the system if you are not able to identify which equipment needs to be adjusted, repaired, or replaced.
2. Look for Signs of Pooling or Run-Off
System components may need to be adjusted if water from an irrigation system is accumulating or running off rather than being absorbed into the ground. Pooling and run-off are both forms of water waste. Solutions for these common irrigation problems include installing or resetting a timer to prevent overwatering or adjusting the heads or nozzles of sprinklers to redirect spray. Owners might want to consider installing an efficient drip irrigation design.
3. Investigate the Pressure
A system misting at a very high pressure or operating at a lower pressure than usual may indicate a problem. High pressure can damage sprinkler heads and low pressure may be due to a leak in lines or other equipment. A pressure-reducing valve or heads with pressure-regulated stems can be helpful for moderating high pressure. If low pressure is not due to leaks, a system redesign may be necessary. You may also want to check with the water utility.
These are only some of the most common issues that may arise with a commercial irrigation system. If a malfunction results in water damage to a structure, contact a mitigation and restoration firm in Whitehouse, TX.